Also available in a pack
Bed Adhesive Glue Stick 15g — Pack of 3
₹486
₹2,999.00
10% off · Prepaid₹599.00 on Amazon
Proevove™ 3D Printer Bed Adhesive Stick 15g
Specially formulated PVP bed adhesive stick for reliable first layers, fewer failed prints, and easy cleanup with water.
₹171
₹490.00
10% off · Prepaid
Direct prepaid price — 10% off marketplace, pay on Razorpay.
ChannelPrice
AmazonCOD₹247.00
Prepaid directSave 10%Prepaid₹171
Buy now
Loading payment…
Pay securely with Razorpay. Shipping details are collected on the payment form.
Add to cart
Add multiple items, then checkout to copy the order block and pay on Razorpay.
Need help choosing? WhatsApp us, call +91 9408584181, or email [email protected].
Key Features
- Reliable first layer every time — high-quality PVP compound improves bed adhesion and keeps prints stable from the first layer.
- Works with PLA, ABS, PETG, TPU, CF, PP, and nylon filaments.
- Prevents warping and corner lifting to improve your print success rate.
- Easy to clean with water after printing.
- Compatible with heated beds and works on glass, PEI, magnetic, and textured build plates.
- Suitable for Bambu Lab, Creality, Anycubic, and Elegoo 3D printer series.
Specifications
- Brand
- Proevove
- Material
- PVP
- Item Form
- Stick
- Net Weight
- 15 g
- Use
- 3D Printing
- Special Features
- Heat resistant, non-toxic, self-levelling
About Bed Adhesive Glue Stick 15g
Glue for PLA, ABS, PETG, and TPU with strong build plate adhesion. Reduces warping, washable and non-toxic. Compatible with Bambu Lab, Creality, Elegoo, and Anycubic printers.
Specially formulated PVP bed adhesive stick for reliable first layers, fewer failed prints, and easy cleanup with water.
Bed Adhesive Glue Stick 15g is made for heated FDM build plates in Indian rooms — humid summers, AC-dry winters, and plates that have lost grip after many PETG prints. A thin coat is enough. You do not need to cake the whole bed.
Use it when corners lift, brims tear, or ABS and PETG weld to PEI. Skip it for small PLA parts on a healthy textured plate. After the print, let the plate cool and wash the film off with warm water.
Proevove bed adhesive is a PVP printer stick, not stationery glue. It is sold as a single stick or a pack of three so you can keep one at the printer and one in reserve.
How to use Bed Adhesive Glue Stick 15g: wipe the plate, swipe a thin translucent coat over the print footprint, heat the bed as usual, and start while the smear is still slightly tacky. After cooldown, wash the plate with warm water and a soft sponge. Do not use it as wood glue or on a cold unheated plate for ABS.
What Bed Adhesive Glue Stick 15g is for: Reliable first layer every time — high-quality PVP compound improves bed adhesion and keeps prints stable from the first layer. Works with PLA, ABS, PETG, TPU, CF, PP, and nylon filaments. Prevents warping and corner lifting to improve your print success rate. Easy to clean with water after printing. Compatible with heated beds and works on glass, PEI, magnetic, and textured build plates. Suitable for Bambu Lab, Creality, Anycubic, and Elegoo 3D printer series.
Listed specifications — Brand: Proevove; Material: PVP; Item Form: Stick; Net Weight: 15 g; Use: 3D Printing; Special Features: Heat resistant, non-toxic, self-levelling.
Bed Adhesive Glue Stick 15g is listed as compatible with Other FDM printers, Bambu Lab A1, Bambu Lab A1 Mini, Bambu Lab P1S, Bambu Lab P2S, Bambu Lab P1P, Bambu Lab H2S, Bambu Lab H2D, Bambu Lab X1C.
To buy Bed Adhesive Glue Stick 15g from this website, add it to the cart and pay on Razorpay, or use Buy now where a payment button is shown. Amazon and Flipkart remain available when those links are listed. Prepaid shop orders need a shipping address on Razorpay.
Proevove is based in Bhavnagar, Gujarat. This bed adhesion product is sold prepaid on this shop and on Amazon India, with Flipkart on selected listings.
Made in India
Designed and packed in Bhavnagar, Gujarat for Indian FDM and resin printers.
Amazon Fulfilled
Marketplace orders ship tracked across India through Amazon.
COD on Amazon
Cash on delivery is available on Amazon listings, not on prepaid Razorpay orders.
Easy Returns
Amazon and Flipkart orders follow that marketplace’s return window.
Frequently asked questions
Answers to common questions before you order.
How do I apply the bed adhesive stick?
Wipe the build plate clean, then swipe a thin translucent coat over the print area — not a thick layer. Heat the bed as usual and start the print. Coat only the footprint of the model if you want the stick to last longer. Apply and print while the smear is still slightly tacky; if it dries while you make tea, add a light second pass.
Which filaments does it work with?
It is a PVP printer glue for PLA, PETG, ABS, TPU, and similar FDM filaments, including carbon-fibre and nylon when you need extra grip. Use a thin coat. PETG and ABS are the usual reason people buy it — those materials either lift at the corners or weld to PEI without a release layer.
Which printers and build plates is it for?
Any FDM machine with a heated bed: Bambu Lab A1, A1 Mini, P1S, P1P, X1C, H2D, H2S, P2S, plus Creality, Elegoo, Anycubic, and other FDM printers. It works on textured PEI, smooth PEI, glass, magnetic sheets, and similar plates.
How do I clean it off the plate?
Let the plate cool, then wash with warm tap water and a soft sponge. No solvents. Dry the plate before the next print. A cloudy film after many prints is leftover glue — one water wash usually clears it.
Do I need glue on every print?
No. Skip it for small PLA parts on a healthy textured PEI plate. Use it when corners lift, in humid Indian summers, for ABS/PETG, large trays, or a plate that has lost grip. You do not need to cake the whole bed.
Is this the same as stationery glue or Pritt?
No. School glue is not made for heated beds. This is a PVP stick formulated for 3D printer plates — a lighter smear, better hold while hot, and it washes off with water after cooldown instead of tearing brims.
How long does the 15g stick last?
If you coat the full bed every print, 15g finishes sooner than you expect. Coat only the model footprint and it lasts many weeks of hobby printing. For daily or farm use, step up to the 36g XXL stick or a pack of 3.
Should I buy 15g, 36g, or a pack of 3?
15g is the starter stick. 36g XXL is more than double the glue for the same formula. Pack of 3 is for people who print often, run more than one machine, or do not want to reorder soon. The glue itself is the same PVP formula in every size.
How do I buy it in India?
Order on Amazon India (COD on many listings) or message us on WhatsApp for the direct prepaid price, which is 10% off the Amazon price. Made in Bhavnagar, Gujarat.
Customer reviews
Bed Adhesive Glue Stick 15g has 96 reviews with an average of 4.6 out of 5.
4.6
Based on 96 reviews
Karan Iyengar
held through monsoon pla
Mary Rodrigues
Amazon box was fine but the inner wrap was just a thin pouch so the stick rattled. Cap stayed on and the glue works on my A1.
S. Sanghvi
Twist base works but the blue cap does not click tight every time. I lost the cap once on the desk. Glue is good, design of the cap is average.
A. Joshi
Delhivery left the packet in the sun for an afternoon. Stick was soft when I opened it, firmed up overnight, and PLA still stuck so the star off is for how it arrived.
Lalit Iyengar
coated way too late
Nandini Pa.
abs corners stayed down
Harsh P.
Phone case in TPU 95A on the A1 Mini used to drag on the first layer and leave a blob. Slowed the first layer and added a faint streak of this stick. Case peeled after cooldown without stretching. Water and a sponge, plate looks new.
Sahil R.
Can't see remaining paste
Hard to judge how much paste is left in the 15g until it suddenly feels hollow. Glue is good on PLA, I just want a window on the body.
Komal Desai
Magnetic sheet on K1 holds PLA again after I thought the sheet was dead. One thin coat.
Parul S.
June humidity in Ahmedabad used to kill first layers on my A1 Mini. A thin swipe of this stick and PLA actually stays while the AC is off.
Megha Iyengar
Doesnt smell harsh which I care about in a bedroom setup. Spreads without crumbs on Anycubic glass.
Vivek Rao
thin coat does the job
Shruti More
I coated then went to level the bed and the film had already gone matte. First print that night lifted on one corner, though it is fine when I coat and print straight away.
Alok Thakur
Horse print in the listing looks gimmicky but I printed a branching tree and it held. Thin white streak on the plate is really all you need.
Rakesh Sanghvi
Price is okay but local hardware glue is cheaper if you only print PLA toys. This is nicer for ABS. Star off because I still think 15g should be a bit cheaper.
K. Naik
tap rinsed the pei
Kunal Shinde
My Ender 3 V2 still has the original glass that used to need painter tape. One pass of glue at bed 60 and a 180mm PLA lid printed overnight without a lifted edge.
Nilesh Naik
Elegoo Neptune plate needed this after I scratched the coating. Glue fills the grip I lost. Prints release when cool.
Yogesh Sanghvi
Glue dries a little faster than I expected if I coat the whole plate then go make tea. Missed a patch on one ABS benchy and that corner lifted. When I apply and print immediately it is okay. Wish it stayed wet a minute longer.
Sneha Dutta
Stick is only 15 grams so it will finish if you coat the full bed every time. I started doing just the footprint. Glue quality is good, just plan to repurchase sooner than a bigger tube.
Bhavya I.
Been printing PLA on the A1 Mini for two years and ABS on an older Ender 3 V2. This 15g PVP stick replaced the school glue I was wasting. Thin layer, heat the bed, first layer bites. Nylon was the one I was nervous about but a raft stayed down. Only thing I do extra is wipe with water when the plate looks cloudy.
Anuj Sh.
Bought it mainly for PETG on a P1S because PETG either welds to PEI or pops off. With a thin Proevove layer I get a clean release after the bed cools. Also tried TPU phone case, first layer was ugly until I slowed it, but it did not slide. CF PETG brim stayed. I do not use it on every print, only when the model has sharp corners.
Leena Sandhu
Neighbour prints on a K1 and kept asking why my PETG trays look flat. I pointed him at this Proevove 15g listing and he bought his own. Mine is half used after six weeks because I only outline. Indian summer on a balcony setup, PEI still holds if I glue first.
Sahil Sen
Courier marked delivered while I was at work. Packet sat with the guard, slightly torn at the flap. Stick was unused. PETG on glass held overnight, so I am rating the glue well and the last-mile poorly.
Namrata Mishra
Non toxic claim seems fair, no headache in a small room. Still I do not let kids play with it.
Anusha Bose
Used to pause long ABS jobs just to add more glue, that was stupid. Now I coat once, trust it, walk away. Printed a 9 hour enclosure, four corners still down. Water wash after. I keep the blue cap on the bed so I do not lose it. Small habit, big difference vs the week I wasted on warping.
Diya Unni
Smell is mild but in a closed bedroom I notice it when the bed is at 100 for ABS. Adhesion is okay once I open the window.
Avni Mittal
One tall vase print popped off at 80% even after glue. Could be my Z offset, could be I put too little on the rim. Other prints that week were fine. Giving 3 because I still do not fully trust it on very tall skinny models. For normal boxes and plates it is okay. Not a bad stick, just not magic.
Hetal Rathore
far corner still peels
George Malhotra
White label is simple no fancy box. Inside the stick is what matters.
Chirag Ro.
Enclosure off, ABS on P1S, I glued the outline. Three corners locked, the back-left still rose maybe 0.4mm on a 180mm panel. Better than the banana I got with no glue. Four stars because it is usable, not because it is foolproof on ABS.
Shankar N.
Garmi me PEI phisalta tha on my A1, even with a wash. This glue brought the grip back without hairspray in the house. PLA boxes, a PETG hook, one ABS test cube, all stayed. Tap water after, plate is not sticky.
Chetan Pawar
Flipkart delivery chap dumped it at the gate and the carton was scuffed. Stick was unused and PETG on the P1S holds, so the missing star is for handling.
Salman Chauhan
Cap is a bit loose after a few twists so I keep it upright. Glue itself is fine, PLA and PETG both stuck.
Vikram Mishra
Cheap cap threads
Glue does the job on PLA. The blue cap threads feel cheap and I check it is actually tight before it goes in the drawer.
Yash Kulkarni
Went back and forth like a glue stick on paper and it pilled on the PEI. Prints were still usable after I scraped the pills, so three stars while I learn a single pass.
Abhilash
Paisa vasool for the 15g size if you only outline the print. I was wasting Pritt on full beds before this.
A. Iyer
Ordered through WhatsApp after a friend forwarded the shop number. Stick arrived with a simple sleeve, seal intact. Used it the same night on PLA planters, no lift. I still keep Magigoo for nylon only, and for daily PLA this is the one on the desk.
Jhanvi Rodrigues
Came to this after a week of failed ABS on an old Ender 3 V2 glass bed. Hairspray made the room stink and still lost corners. Magigoo works but I did not want to import another bottle. This Proevove stick is messier than a glue pen, you have to learn a thin translucent pass, but a 4 hour ABS box stayed overnight at bed 100. PLA is easy on it. TPU needed a slower first layer as usual. I keep a steel cup for the blue cap because it rolls. Water cleanup is the part that sold me after the first wash. Not a miracle on dirty plates, wipe those first.
Advait Kaur
Ordered this after my PEI sheet started losing grip in summer. Proevove stick brought it back. Glass and textured both okay. Not smelly like some sprays.
Wasim Sanghvi
used it last night stuck
A. Nair
Surat balcony in May
I print on a balcony in Surat, May heat, fan on the printer, no enclosure. PLA used to lift on the A1 textured plate by dinner even after washing. Started outlining the model with this 15g stick, heating to 60, waiting one minute, then printing. A 6 hour planter stayed down. PETG hook the next morning also stayed, released when the plate hit room temp. I wash with tap water and a worn sponge, no soap unless it looks cloudy. Half the stick is still there because I stopped coating the whole 256. If you only print keychains you may not need it. If your plate is tired and the room is hot, this is the cheap fix I actually kept using.
Sonia
H2S textured plate is already grippy but PETG-CF still lifted a tab on a long bracket. Light coat under the tabs only, rest of the plate clean. Print held, then released at room temp. I like that I do not have to soap the whole sheet every time, just the glued patches.
Gauri Brar
First layer finally stays
First layer finally stays put on my A1. Was getting tiny corner lift with matte PLA before this.
Pratik Sen
worth it for pla
Daniel Kamath
I globbed it on like school glue because that is what I used to do with Pritt. First layer was ridged and the brim welded so hard I nicked the PEI peeling it. Thin coat later was fine. Three stars because the stick is usable if you already know to go translucent, which I did not.
Harshita
Borosilicate ABS box
Old borosilicate on a converted Ender. ABS at 100 bed without an enclosure is usually a waste of filament. This stick plus a 5mm brim kept a 120mm box down for five hours. Cleanup is just warm water, which I did not expect to work this well on glass.
Bhavna Ch.
Water cleanup is actually true, not marketing. Warm tap and a soft sponge, plate is clean.
Aditi Iyer
Nylon CF print held overnight on a magnetic sheet. I was ready to cancel at layer 20.
Bharat Fernandes
Kaam kar raha hai on my Bambu A1, no drama. Proevove did what the hairspray never did.
Veena Sa.
WhatsApp order reached in four days, packing was a thin sleeve, not a box, so the stick had a scuff on the label. Paste inside is fine. I use it on an Ender 3 V2 glass and on a borrowed P1S. PLA is reliable. PETG still lifted 2mm on one corner of a 220mm tray even with glue, so I am not calling it solved for big PETG. Size is the other nit, 15g is a sample if you coat like I used to. Outline only and it lasts. Four stars is honest for me.
Sagar Dhillon
ABS corners behaving
Corner lift on ABS stopped after I started using a thin coat instead of hairspray. Bed at 100, plate is textured PEI.
Bhavna
MRP looks fake at 490 but the Amazon price around 219 is what I paid. Fine for what it is.
Hitesh Gill
Really a light pass is enough, I was wasting glue the first two days by coating like butter.
Ira
Courier delayed by two days and the box was slightly crushed, stick itself was fine. Adhesion is good. Deducting a star for packing, not the glue.
Leena S.
Friends asked which glue I use after seeing a clean first layer on PETG. I sent them this listing. Proevove is Indian which is why I tried it over importing Magigoo again.
Deepika Mehta
15g vanished in two weeks
Gauri Shah
Blue cap looks same as those stationery sticks but the paste is different, more even, less chalky. I used it on glass and on a magnetic sheet this week. PLA brim stayed, PETG released after cooldown. Proevove paste does not crumble the way cheap office glue does when the bed is hot.
S. More
Anycubic Kobra glass no longer needs tape on the edges. Light coat, heat, print.
Shalini Kaul
Third week using it as the default for anything with sharp corners. A1 Mini for PLA toys, P1S for PETG trays. Amazon listing photos look a bit extra but the faint film on black PEI is how I apply it now. CF PETG still wants a brim. Nylon I have not trusted yet. 15g is enough if you outline. I already eyed the 36g for the bigger printer. Cleanup is still just the kitchen tap, which is why it stayed on the bench instead of going in a drawer.
Abhay
put on too much
Suraj Das
glass bed loves this
Vikram Chavan
Daily driver stick
After three weeks of daily printing I am maybe 40% through the 15g because I only mark the model outline. PLA, PETG, a bit of ABS. Corners that used to curl on a 150mm square are flat. I keep a wet cloth next to the printer for cleanup. If u print once a month maybe skip it, if you print every evening this is the small tool that saves filament.
Zoya Sh.
a1 mini pei plate
Mahesh Subramanian
TPU flexible parts were sticking then tearing when I yanked them hot. With this I wait for cooldown and they peel clean.
S. Patil
Pehle Pritt use karta tha for PLA, corners still lifted on bigger bases. This one is made for printers, smear is lighter and print comes off after cooldown without tearing the brim.
Rakesh He.
pla petg both fine
Shalini Shenoy
PETG on P1P
P1P textured sheet plus PETG used to either weld or pop. After cooldown the part slides off with a little flex, no gouge in the PEI.
A. Prabhu
K1 plus PETG
Creality K1 textured bed plus this stick handled a PETG tool holder that used to warp into a banana. I did not change temps. Only added glue.
Rahul Bhat
Ender 3 glass bed
I run an Ender 3 with a cheap glass plate that used to need painter tape. One pass of this Proevove stick and a 20cm PLA box printed overnight without a single lifted corner. Next morning I washed the glass, dried it, ready again. For 219 this is cheaper than ruining another print.
Swati Sanghvi
200mm ABS square on textured PEI kept three corners locked and one still lifted a millimetre. Better than hairspray, not perfect on this filament yet.
Hema
ender v2 glass sorted
V. Sen
washes off easily
Jayesh
Wish the stick lasted longer when I coat a full A1 bed. Quality is good. I will buy a bigger size next, this 15g goes if you are sloppy with how much you put.
Mihir Rajan
Bought a second 15g after the first ran down because I only coat the square of the model. PLA and PETG both behaved this month on the A1.
Yash Mohanty
Textured PEI on my P1S was already decent, this just makes first layer less stressful on big trays.
Yogesh Shinde
Just a swipe before every tall print now. Habit took a week.
Shankar Ghosh
Packing acha tha box me stick was new, seal intact. Using on Creality K1.
Mihir Arora
Applied a thin translucent streak on the black PEI like in the photo and the brim held through a 6 hour print. Washed the plate under the tap after, no gummy leftover.
Anita Shetty
X1C in an uncooled room during April. PLA corners used to rise by layer 30. Thin coat on the smooth PEI, brim stayed, 7 hour print finished flat. I wash the plate in the sink, dry with a towel, and do not coat every small clip, only the bigger bases.
Pallavi Bansal
Humidity in Kochi during the rains is rude to PEI. This stick helped more than wiping with IPA. Still, a large PLA lithophane lifted 1mm at the top-right even after a coat, so I add a brim now. Cap is okay if I stand the stick up. 15g will not survive a month of full plates, I already know. Glue quality is not the problem. I will repurchase the bigger size. Sahi kaam karta hai for daily PLA, PETG is 80 percent.
S. Brar
Stopped spraying the bedroom with cheap hairspray. This stick is slower to put on but my P1S room does not smell like a salon.
G. Saha
p1s brim stayed put
B. Kamath
Adhesion on PLA is sorted. After a month the twist started feeling gritty, like dried paste in the thread. I wipe it now and the glue still spreads fine. Star off for maintenance I did not expect on a 15g stick.
Karthik Mittal
no warp on abs
Thomas Mahapatra
cheaper than magigoo honestly
Bhavesh N.
blue cap stick works
Abhay Dasgupta
Silk PLA on glass is usually a lottery. Light coat at 65 bed kept the vase down for four hours, then the tap left no film.
Anusha Gowda
Stopped using spray
Switched from 3DLAC spray to this after the spray can hissed empty mid week. Stick is slower to apply on a 256 bed but I am not breathing aerosol. Proevove label is plain, product is not. PP was the surprise, a small clip stayed down on PEI with bed at 80. Wash, dry, next job.
Sameer
K1 Max was not the issue, my Z offset was. Once I dialled that and added a faint coat, TPU watch straps stopped sliding on the magnetic sheet.
Aarav Dalal
Heated bed at 60 and a light swipe is enough for standard PLA. No need to cake it on.
Aman
Got the 15g Proevove after a failed branching print. Same model reprinted fine.
Kiran Sen
cap wobbles glue is okay
Pallavi Baruah
Compared with Magigoo this Proevove stick is messier to apply but a fraction of the price. Same job on PETG for me. I keep Magigoo for nylon only now.
Hema Shah
Thoda chhota hai 15g for a P1S if you coat like butter. Product works, I just picked the wrong size and will try the bigger one next.
Anusha Malhotra
Outer envelope arrived torn at the corner and the stick was loose inside with no bubble wrap. Cap had popped and the exposed paste had lint on it. I wiped the tip and the remaining glue seems usable on a test square. Sending a glue stick like this is how it dries out before you even print.