Also available in a pack
Bed Adhesive Stick XXL 36g — Pack of 3
₹1,349
₹2999.00
10% off · Prepaid₹1499.00 on Amazon
Proevove™ 3D Printer Bed Adhesive Stick XXL 36g
XXL 36g PVP bed adhesive stick — more than double the Proevove standard 15g stick for high-volume printing and frequent use.
₹449
₹999.00
10% off · Prepaid
Direct prepaid price — 10% off marketplace, pay on Razorpay.
ChannelPrice
AmazonCOD₹499.00
Prepaid directSave 10%Prepaid₹449
Add to cart
Add multiple items, then checkout to copy the order block and pay on Razorpay.
Need help choosing? WhatsApp us, call +91 9408584181, or email [email protected].
Key Features
- XXL 36g size — 2.4x the standard 15g Proevove adhesive stick for high-volume printing.
- Reliable first layer every time — high-quality PVP compound improves bed adhesion and keeps prints stable.
- Works with PLA, ABS, PETG, TPU, CF, PP, and nylon filaments.
- Prevents warping and corner lifting to improve your print success rate.
- Easy to clean with water after printing.
- Compatible with heated beds and works on glass, PEI, magnetic, and textured build plates.
- Suitable for Bambu Lab, Creality, Anycubic, and Elegoo 3D printer series.
Specifications
- Brand
- Proevove
- Material
- PVP
- Item Form
- Stick
- Net Weight
- 36 g
- Use
- 3D Printing
- Special Features
- Heat resistant, non-toxic, XXL size
About Bed Adhesive Stick XXL 36g
Extra-large 36g PVP bed adhesive stick for PLA, ABS, PETG, and TPU. Strong build plate adhesion, reduces warping, washable and non-toxic. Compatible with Bambu Lab, Creality, Elegoo, and Anycubic printers.
XXL 36g PVP bed adhesive stick — more than double the Proevove standard 15g stick for high-volume printing and frequent use.
Bed Adhesive Stick XXL 36g is made for heated FDM build plates in Indian rooms — humid summers, AC-dry winters, and plates that have lost grip after many PETG prints. A thin coat is enough. You do not need to cake the whole bed.
Use it when corners lift, brims tear, or ABS and PETG weld to PEI. Skip it for small PLA parts on a healthy textured plate. After the print, let the plate cool and wash the film off with warm water.
Proevove bed adhesive is a PVP printer stick, not stationery glue. It is sold as a single stick or a pack of three so you can keep one at the printer and one in reserve.
How to use Bed Adhesive Stick XXL 36g: wipe the plate, swipe a thin translucent coat over the print footprint, heat the bed as usual, and start while the smear is still slightly tacky. After cooldown, wash the plate with warm water and a soft sponge. Do not use it as wood glue or on a cold unheated plate for ABS.
What Bed Adhesive Stick XXL 36g is for: XXL 36g size — 2.4x the standard 15g Proevove adhesive stick for high-volume printing. Reliable first layer every time — high-quality PVP compound improves bed adhesion and keeps prints stable. Works with PLA, ABS, PETG, TPU, CF, PP, and nylon filaments. Prevents warping and corner lifting to improve your print success rate. Easy to clean with water after printing. Compatible with heated beds and works on glass, PEI, magnetic, and textured build plates. Suitable for Bambu Lab, Creality, Anycubic, and Elegoo 3D printer series.
Listed specifications — Brand: Proevove; Material: PVP; Item Form: Stick; Net Weight: 36 g; Use: 3D Printing; Special Features: Heat resistant, non-toxic, XXL size.
Bed Adhesive Stick XXL 36g is listed as compatible with Other FDM printers, Bambu Lab A1, Bambu Lab A1 Mini, Bambu Lab P1S, Bambu Lab P2S, Bambu Lab P1P, Bambu Lab H2S, Bambu Lab H2D, Bambu Lab X1C.
To buy Bed Adhesive Stick XXL 36g from this website, add it to the cart and pay on Razorpay, or use Buy now where a payment button is shown. Amazon and Flipkart remain available when those links are listed. Prepaid shop orders need a shipping address on Razorpay.
Proevove is based in Bhavnagar, Gujarat. This bed adhesion product is sold prepaid on this shop and on Amazon India, with Flipkart on selected listings.
Made in India
Designed and packed in Bhavnagar, Gujarat for Indian FDM and resin printers.
Amazon Fulfilled
Marketplace orders ship tracked across India through Amazon.
COD on Amazon
Cash on delivery is available on Amazon listings, not on prepaid Razorpay orders.
Easy Returns
Amazon and Flipkart orders follow that marketplace’s return window.
Frequently asked questions
Answers to common questions before you order.
How do I apply the bed adhesive stick?
Wipe the build plate clean, then swipe a thin translucent coat over the print area — not a thick layer. Heat the bed as usual and start the print. Coat only the footprint of the model if you want the stick to last longer. Apply and print while the smear is still slightly tacky; if it dries while you make tea, add a light second pass.
Which filaments does it work with?
It is a PVP printer glue for PLA, PETG, ABS, TPU, and similar FDM filaments, including carbon-fibre and nylon when you need extra grip. Use a thin coat. PETG and ABS are the usual reason people buy it — those materials either lift at the corners or weld to PEI without a release layer.
Which printers and build plates is it for?
Any FDM machine with a heated bed: Bambu Lab A1, A1 Mini, P1S, P1P, X1C, H2D, H2S, P2S, plus Creality, Elegoo, Anycubic, and other FDM printers. It works on textured PEI, smooth PEI, glass, magnetic sheets, and similar plates.
How do I clean it off the plate?
Let the plate cool, then wash with warm tap water and a soft sponge. No solvents. Dry the plate before the next print. A cloudy film after many prints is leftover glue — one water wash usually clears it.
Do I need glue on every print?
No. Skip it for small PLA parts on a healthy textured PEI plate. Use it when corners lift, in humid Indian summers, for ABS/PETG, large trays, or a plate that has lost grip. You do not need to cake the whole bed.
Is this the same as stationery glue or Pritt?
No. School glue is not made for heated beds. This is a PVP stick formulated for 3D printer plates — a lighter smear, better hold while hot, and it washes off with water after cooldown instead of tearing brims.
How is XXL 36g different from the 15g stick?
Same PVP glue, same water cleanup, same printers. 36g is 2.4× the 15g stick so you are not twisting a small stick over a full A1 or P1S bed every day. Choose 15g to try it; choose XXL if you already use it often.
Will 36g dry out before I finish it?
Cap it after every use and store it upright. A 36g stick is for frequent printers. If you print only a few hours a week, 15g is the better size so the stick does not sit open for a year.
How do I buy it in India?
Order on Amazon India (COD on many listings) or message us on WhatsApp for the direct prepaid price, which is 10% off the Amazon price. Made in Bhavnagar, Gujarat.
Customer reviews
Bed Adhesive Stick XXL 36g has 64 reviews with an average of 4.6 out of 5.
4.6
Based on 64 reviews
Yash B.
Too much stick for a Mini
Ordered XXL thinking more grams is always smarter. On an A1 Mini plate the fat barrel hides the nozzle area while I coat. I keep knocking the wipe tower zone. Glue chemistry is fine, form factor is wrong for this machine. Should have stayed with 15g.
Deepika Se.
White tube is genuinely bigger
Sandeep Joshi
36g going to last
Rohit Iyengar
Will not sit in the P1S side pocket the way the 15g did. I leave it on the shelf and walk over. Glue still holds PETG. Tiny workflow downgrade.
Jayesh Dutta
Proevove 36g is the one I tell people to get if they already liked the 15g chemistry. Do not overthink it.
Kirti Gowda
neon stripe easy to spot
Madhav Mohanty
White cap scuffs easily, already looks used. Inside glue is clean.
Ojas
Takes a couple of twists to get paste out the first time, stiffer than the 15g I remember. After that it is smooth. Minor annoyance on day one.
Harsh
New H2D, big plate, I was not going to baby a 15g. Coated, printed a wide duct, corners stayed. Water cleanup after. That is the whole review. I had the 15g leftover from last year and it felt like a sample next to this tube. Proevove XXL is what I should have ordered when the H2D arrived.
Siddhi Agarwal
X1C 256 plate used to eat the 15g if I coated generously. This 36g Proevove I can be a little less stingy on big parts. PETG tray last night came off clean after cooldown.
Ritika
Water still lifts the film after a PETG job. Nothing new chemically, just more of it. I wanted that, not a different formula.
Saurabh Patel
Mast size if your plate is bigger than an A1 Mini. I should have bought this first.
Komal Mahapatra
Fat tip is less precise on small clips than the 15g. I keep the leftover blue stick for jewellery-size parts. XXL is for trays and helmets, and that split is slightly annoying.
Ruchi Pillai
Glass on a wide bed used to need two passes of the small stick. One pass of XXL, done. PLA box overnight, flat.
Bhavna Das
A little spendier than the 15g so I hesitated. Performance is the same glue, just more of it. Star off because I wish the unit price was closer to the small one.
Parul Banerjee
no more mid coat twist
Deepak Pereira
High volume week, five long prints, still plenty left in the white tube.
Dhruv Pi.
TPU phone stand on PEI, first layer bit, cooled, peeled. I had leftover XXL so I did not hesitate.
Rahul Dalal
fat barrel, slower twist, same glue
Sagar Rajan
Far edge of a 300 bed got a ragged coat because the barrel hides where I am smearing. Held most PLA. One PETG brim still lifted at that corner. I wanted a slimmer applicator at this gram count.
Aarav Saha
Advancing the paste takes more turns than I have patience for, so I overshoot and get a blob, then smear too thick. First layer can weld to PEI if I do not wipe the excess. Works when I am careful. For daily small parts I prefer the 15g.
Ramesh Gaikwad
Size is not a gimmick
2.4 times the small stick is not marketing, you feel it in the hand. I print large bases so this size matches. Still using a thin layer, just not twisting every ten seconds.
Nisha Thakur
Proevove XXL sat next to the leftover 15g. I reach for the white one whenever the model is over 150 mm. Habit formed in two days.
Ashish Reddy
I coat the footprint only and this thing will last ages. Bought XXL out of habit from painting big parts.
Zain Chauhan
Smell is a bit stronger when I open the fresh XXL, maybe more surface of glue exposed. Fades after a minute. Adhesion is okay. One nylon print still lifted a corner, I think I coated too thin on a huge bed. Rest of the week was fine.
Bharat
xxl makes sense for p1s
Pranav Prabhu
Elegoo wide plate plus PETG used to banana. XXL coat, heat, print. I did not change slicer settings.
Alok
Magigoo still lives in the drawer for fussy nylon. Daily PLA and PETG moved to this Proevove XXL because I was tired of a tiny stick on a big plate. Same wash-off story, less money per gram. I coat the outline, heat, print, rinse. That loop is boring now which is what I wanted.
Kiran Choudhary
Printed two helmets back to back on a wide Creality. Coated once per job, corners stayed, washed the plate twice. Still lots of stick left. This is the size I should have started with when I moved off an A1 Mini. I even used it on a small TPU clip the same night because I stopped treating glue like gold. Proevove XXL changed that habit.
Dev Pandey
Helmet PLA stayed overnight
Creality wide bed plus this stick is the combo I needed for helmet-size PLA. Corners used to rise by morning. I did not change temps, only the glue size.
Siddharth Rathore
Printed a 350-ish mm-class part on a custom bed. Thin coat, heated, no corner lift. The small stick would have been empty halfway through coating.
Parul
If u have a P1S or bigger just skip the small stick. I learned that after two 15g empties of Proevove. The white tube covers a 256 plate without that mid-coat twist dance. Water still cleans it. I keep the leftover 15g in a travel pouch now.
Reyansh Da.
Net 36g on the label matches the heft. Stopped worrying about running dry mid project.
Bhavna Bansal
Theek hai size for someone who prints 4 to 5 hours most evenings.
Smit Ghosh
lasts past one project
Navya Khanna
Works on PLA all day. One large ABS panel still lifted a corner after 7 hours, maybe I under-coated the far edge because the tube is wide and I rushed. Other prints stuck. Not hate, just not foolproof on huge parts if you hurry the smear.
Dhruv P.
Label says BED ADHESIVE STICK XXL which is exactly what I searched. Neon stripe helps me find it in a messy toolbox.
G. Dutta
Drawer slot that held two 15g tubes only takes this XXL sideways. Same water-wash glue. Storage is the downgrade, volume is the upgrade.
Jayesh Solanki
I half expected a glue-pen applicator at this size. It is still a twist-up stick, just fatter. Fine on a wide bed, awkward if you wanted a click pen for tiny footprints.
Hitesh
Bought XXL so the 15g can stay in the travel kit. Home machine gets the white tube.
Omkar
Anycubic large plate, same story, thin layer, no warp.
Sanjay Iyer
Studio plate is 350-class. We were wasting time with mini sticks. This white XXL is what we hand visitors now. Thin layer, wash after, next person prints. I keep a wet cloth on the bench so cleanup is thirty seconds. Proevove being the house glue also means nobody brings random Pritt from home.
Vikas Rathore
Cap diameter is larger than any hole in my caddy, so it stands on the bench and collects dust. Function is fine. I miss a slimmer 15g silhouette for storage.
O. Das
Textured PEI marathon
Did a weekend of trays on textured PEI. XXL still looks half full. Wash between jobs, film comes off. This is the boring upgrade that saved filament. I used to finish a 15g in that same weekend and then scrape the last bit. Proevove 36g just sits there looking unused which is the point.
Aarohi Mohanty
Twist action is slower than the small stick, more mass in the barrel. Once paste shows it coats a 256 plate in one pass. Minor friction, not a deal breaker.
Geeta Parekh
large plate finally practical
Rudra Dasgupta
Barrel is thick enough that I brace it against the bench to advance the glue. The 15g I could twist one-handed. Adhesion is unchanged. Just clumsier on a crowded desk.
Tarun R.
PP clip test
Tried a small PP clip on textured PEI with bed heat. Held.
Deepika P.
Neon green stripe looks loud on the shelf. Glue is fine, quieter label would have been nicer.
Charan Choudhary
Tube is fatter so it rolls off a slanted table. Glue quality is good, wish the base was grippier.
Rajesh Pai
Swept the P1S plate in fewer strokes than the old 15g. Same thin layer habit, just less twisting.
Rakesh Mohanty
K1 Max 300-class bed was a pain with a tiny stationery stick. XXL covers the edges without stopping to twist every 10 cm. ABS box stayed down all night.
Zoya Goel
H2D bed is wide. Small glue sticks feel silly on it. This one I can finish a coat before the bed cools.
Bhavya Dasgupta
K1 Max magnetic sheet
Heated magnetic sheet on K1 Max plus this stick, PLA and ABS both behaved this week. I am not going back to a travel-size glue.
Siddharth Dutta
bigger than the 15g obviously
Firoz Chopra
p1s plus xxl is enough
Karthik B.
CF PETG on a 256 bed held the brim. I used to skip glue on CF and regret it. XXL means I stop rationing the smear.
Nidhi Singh
The 36g tube eats a pocket in my tool bag that the 15g never did. Glue is the same thin coat I already like. I still grab it for the P1S, I just stopped carrying it to the makerspace.
Divya Tiwari
Wish it came with a cap leash or something, the white cap is easy to misplace on a big bed. Glue is solid.
Smit Kothari
Farm single-machine use
I am not a farm, just one busy X1C. Still the XXL is the right SKU. I was replacing 15g too often and it annoyed me.
Vikram Kamat
Heavier stick, easy to mash a thick ridge on the first pass. I wasted a bit until I lightened my hand. After that it is the usual thin PVP film.
Rajesh S.
White cap and white twist, not the blue 15g look. Easy to grab the right one from the drawer when both sizes sit together.
Chetan Bhatia
Lasts past the 15g habit
Moved off the small blue stick because I was emptying it on 256 plates. The 36g white tube is the same PVP smear, water still lifts it, I just twist less often. Big PETG tray overnight, corners stayed. This is the size that matches a P1S if you print most evenings.
Kavya Pattnaik
white stick covers faster