Also available as a single
Lead Screw Lubricant 10ml
₹500
₹2,999.00
10% off · Prepaid₹555.00 on Amazon
Proevove™ Lead Screw Lubricant for 3D Printer Z-Axis – Pack of 3 (10ml Each)
Value pack of three Proevove PTFE grease syringes for trapezoidal Z-axis lead screws — not for linear rods. Ideal for stocking up or maintaining multiple printers.
₹1,349
₹2,999.00
10% off · Prepaid
Direct prepaid price — 10% off marketplace, pay on Razorpay.
ChannelPrice
AmazonCOD₹1,499.00
Prepaid directSave 10%Prepaid₹1,349
Buy now
Loading payment…
Pay securely with Razorpay. Shipping details are collected on the payment form.
Add to cart
Add multiple items, then checkout to copy the order block and pay on Razorpay.
Need help choosing? WhatsApp us, call +91 9408584181, or email [email protected].
Key Features
- Pack of 3 — each syringe is 10ml (30ml total), ideal for frequent maintenance or multiple printers.
- PTFE-based lead screw grease — formulated for low-friction, high-load trapezoidal Z-axis screws.
- Prevents Z-banding with smooth, consistent screw movement for better print quality layer by layer.
- 10ml syringe applicator for clean, controlled application without waste.
- Not for linear rods — optimized exclusively for lead screws; do not use on smooth rods or linear rails.
- Reduces wear on screw threads and brass or POM nuts during regular printer maintenance.
- Compatible with Bambu Lab, Creality, Elegoo, Anycubic, Prusa, Voron, and most FDM printers with lead screw Z-axis.
- Made in India by Proevove — trusted by FDM 3D printer users across India.
Specifications
- Brand
- Proevove
- Material
- Polytetrafluoroethylene (PTFE)
- Item Form
- Syringe
- Net Quantity
- 10 ml per syringe
- Package Quantity
- 3
- Total Quantity
- 30 ml
- Use
- 3D Printer Z-Axis Lead Screws
- Country of Origin
- India
- Special Features
- Heat resistant, non-toxic, precision applicator
About Lead Screw Lubricant — Pack of 3
Pack of three 10ml PTFE-based lead screw grease syringes for 3D printer Z-axis maintenance. Reduces Z-banding, smooths screw movement, and is made in India by Proevove.
Value pack of three Proevove PTFE grease syringes for trapezoidal Z-axis lead screws — not for linear rods. Ideal for stocking up or maintaining multiple printers.
Lead Screw Lubricant — Pack of 3 is a PTFE film for moving axes, not a general-purpose workshop grease. Use the gold lead-screw grease only on trapezoidal Z screws. Use the linear-rod lubricant only on smooth steel rods.
Wipe old paste off first. A rice-grain amount in the thread valleys or along the rod is enough. Jog the axis so the nut or bearing spreads it, then wipe anything that would sling toward the bed.
Relubricate when the axis squeaks, ticks on Z hops, or feels grabby — often every one to three months for hobby use. Stacking fresh grease on blackened paste makes it gritty.
How to use Lead Screw Lubricant — Pack of 3: clean old paste with IPA, apply a rice-grain amount, jog the axis ten to fifteen times, and wipe excess. Do not put lead-screw grease on smooth rods, and do not put rod lubricant on a trapezoidal Z screw.
What Lead Screw Lubricant — Pack of 3 is for: Pack of 3 — each syringe is 10ml (30ml total), ideal for frequent maintenance or multiple printers. PTFE-based lead screw grease — formulated for low-friction, high-load trapezoidal Z-axis screws. Prevents Z-banding with smooth, consistent screw movement for better print quality layer by layer. 10ml syringe applicator for clean, controlled application without waste. Not for linear rods — optimized exclusively for lead screws; do not use on smooth rods or linear rails. Reduces wear on screw threads and brass or POM nuts during regular printer maintenance. Compatible with Bambu Lab, Creality, Elegoo, Anycubic, Prusa, Voron, and most FDM printers with lead screw Z-axis. Made in India by Proevove — trusted by FDM 3D printer users across India.
Listed specifications — Brand: Proevove; Material: Polytetrafluoroethylene (PTFE); Item Form: Syringe; Net Quantity: 10 ml per syringe; Package Quantity: 3; Total Quantity: 30 ml; Use: 3D Printer Z-Axis Lead Screws; Country of Origin: India; Special Features: Heat resistant, non-toxic, precision applicator.
Lead Screw Lubricant — Pack of 3 is listed as compatible with Bambu Lab A1, Bambu Lab A1 Mini, Bambu Lab P1S, Bambu Lab P2S, Bambu Lab P1P, Bambu Lab H2S, Bambu Lab H2D, Bambu Lab X1C, Other FDM printers, Resin 3D printers.
To buy Lead Screw Lubricant — Pack of 3 from this website, add it to the cart and pay on Razorpay, or use Buy now where a payment button is shown. Amazon and Flipkart remain available when those links are listed. Prepaid shop orders need a shipping address on Razorpay.
Proevove is based in Bhavnagar, Gujarat. This lubricant product is sold prepaid on this shop and on Amazon India, with Flipkart on selected listings.
Made in India
Designed and packed in Bhavnagar, Gujarat for Indian FDM and resin printers.
Amazon Fulfilled
Marketplace orders ship tracked across India through Amazon.
COD on Amazon
Cash on delivery is available on Amazon listings, not on prepaid Razorpay orders.
Easy Returns
Amazon and Flipkart orders follow that marketplace’s return window.
Frequently asked questions
Answers to common questions before you order.
Can I use this on linear rods or linear rails?
No. This gold PTFE grease is only for trapezoidal Z lead screws (the threaded rod the brass or POM nut rides on). Using it on smooth rods or rails makes a sticky mess. For rods, use Proevove Linear Rod Lubricant instead. The label says “do not use for linear rods” — that warning is real.
How do I apply lead screw lubricant?
Wipe old dry grease off the screw with IPA and a cloth until the threads look like bare metal. Lay a thin gold line in the thread valleys from the syringe, then jog Z up and down about ten to fifteen times so the nut spreads it. Wipe anything that would sling toward the bed. Recap the syringe.
How often should I relubricate the Z screw?
For hobby use, every one to three months, or when the axis starts to squeak, tick on Z hops, or feel grabby. Clean the old film off before adding more — stacking fresh grease on blackened paste makes it gritty.
Which printers is this for?
Any FDM (or resin) machine with a trapezoidal Z lead screw: Bambu Lab A1, A1 Mini, P1, X1, H2, Creality Ender/K1, Elegoo, Anycubic, Prusa, Voron, and similar. If your Z axis is a smooth rod or a linear rail, this is the wrong bottle.
The syringe plunger feels stiff. Is that normal?
Yes when the room is AC-cold. The grease is thick on purpose so it stays in vertical threads instead of dripping. Warm the syringe in a pocket for a few minutes, then dose a rice-grain amount. Do not force a blob out.
Will it drip or sling onto the print bed?
Used as a thin film in the thread valleys, it stays put. Cheap tub grease is what slings. Wipe excess after jogging the axis, especially on a tall screw next to the bed.
What is in the pack of 3?
Three 10ml syringes (30ml total) of the same PTFE lead-screw grease. Useful if you have more than one machine, a tall dual-Z, or you do not want to reorder after the first syringe.
How do I buy it in India?
Order on Amazon India (COD on many listings) or message us on WhatsApp for the direct prepaid price, which is 10% off the Amazon price. Made in Bhavnagar, Gujarat.
Customer reviews
Lead Screw Lubricant — Pack of 3 has 58 reviews with an average of 4.6 out of 5.
4.6
Based on 58 reviews
Mihir Desai
H2D without a full teardown
H2D Z maintenance without removing the whole stack. Syringe reach is the same as the single SKU, just three of them. Parked the unused pair so the workshop does not run dry mid-job.
Mukesh Gill
No difference in colour or thickness between the three barrels. Consistency is good. Applied with the tip in the thread, wiped, jogged. Done.
M. Gupta
Quiet Z on two Crealitys
Both towers on a dual-Z and a second Ender in the same week. Gold paste, thick, wipe the excess, jog twenty times. The remaining syringe is for the resin printer lift screw, which is also a lead screw, not a rod. Proevove kept the same warning on every barrel so I did not treat the 3-pack as a mixed kit. 30ml total is the right restock if you already trust the single and just need volume. Same grease I already trusted from the single tube.
Isha Menon
Spares for the second printer.
Aditya Dhillon
Every syringe says not for linear rods, which I respect. Sitting next to the pink rod oil they still look like siblings in a dim drawer. I almost grabbed the gold one for an X rod at night. Function on Z is fine. Colour-band on the cap would help.
Yash Roy
Two syringes were packed solid gold. The third had a visible air pocket near the tip, so the first push spat a bubble then a string. Usable after I bled it onto a rag, but in a 3-pack I expected even fills. Still not putting this on linear rods, as written. The two good ones dressed a dual-Z without drama.
Anshul Sen
Three clean 10ml doses.
Ramesh N.
Needed a tube at two benches plus a sealed spare. I wrote names on the barrels myself because nothing on the wrap is unique. Thick PTFE, rods left alone as labelled. A write-on strip would have been an easy fifth star.
Saurabh Banerjee
Wrote L-SCREW ONLY on the barrel with a marker now. Three identical syringes look alike next to the pink linear-rod one, so labelling helps.
Aarav Krishnan
One cap was not seated
Two syringes were perfect. The third had the black cap slightly loose and a smear of gold grease inside the bag. Wiped it, still usable, but for a pack-of-3 I expected all three sealed the same way. Grease quality on the two good ones is the usual thick PTFE, and the messy one still works on a lead screw after I cleaned the tip. Just a packing nit, not a formula problem, and I am keeping the usable volume. Still using all three barrels anyway.
Tejas Shinde
Worth it if you already trust the single
Did not want a different formula. This is the same high-adhesion PTFE in three syringes. Used it after a full IPA clean on a squeaky Ender Z and the scrape is gone. Remaining volume sits in the spare-parts box next to nozzles and socks. Brass nut is quiet, the screw stays wet on the vertical, and I still have two sealed backups for the second desk. That is the stock-up I actually wanted. Two sealed backups is the point of paying for the pack.
Saurabh Kapoor
Mailer was a thin poly, three syringes stacked. Nothing burst. I still wanted a paper sleeve so the red warning stays readable and does not scuff in transit. Grease on the lead screw did its job after I cleaned the old film.
Zain Gowda
Quality matches the single I used last year — stays on vertical Z screws, quiets brass nuts. The three syringes arrived loose in a pouch, so they rattle against each other. A cheap cardboard sleeve would have been nicer.
Hema Sharma
That is the whole reason I picked pack-of-3. First syringe dressed a noisy P1P Z. The other two are still sealed with the black caps. No leaking in the drawer after weeks.
Farhan B.
Bought the 3-pack after finishing a single tube on two lead screws. Each syringe still has the black screw cap and grey plunger. No mystery bottles, just three of the same Proevove 10ml.
Yogesh Mukherjee
Pack of 3 is what I wanted — one open, two untouched. Lead screws only, as written.
Jaya Thakur
Grey plungers have no volume marks, so remaining millilitres are a guess from the gold column. Fine for hobby. A 2-4-6-8-10 print would help on a 3-pack you share. Lead screws only, as the wrap repeats.
Megha Parekh
Same smell-free PTFE as the single. No surprise reformulation in the 3-pack.
Y. Panchal
Stock-up is useful. I rotate the oldest syringe first even without a batch note. Overthinking a grease, not enough to drop a star.
Harish Prabhu
Label on every piece still says Do not use for linear Rods. I appreciate they did not drop the warning on the multipack.
Shruti K.
One for home, two untouched.
Navya Bose
Cheaper than three separate checkouts
Math worked out better than buying singles when I needed grease for a Bambu and a Creality in the same week. Same PTFE, same 10ml syringe format. Both Z axes quieter after the first jog cycle.
Kirti Rodrigues
Running dual-Z and a second frame is why three syringes made sense. Works on the screws. Tiny minus: the barrels will not stand upright in my parts bin, they roll. A cheap tray would have earned the fifth star.
Shreya D.
Bought three thinking I would park one per printer. Then I found the outer labels had already started to peel, and the not-for-linear-rods line was half gone on one wrap. Grease is thick and stays on the screw. I just do not love a warning that rubs off on a product that is easy to mix up with rod oil.
Vikram Pandey
Stocked the makerspace drawer.
Urvi More
Does the job and the 3-pack is practical. Tiny nit: the plungers are all grey/black and get slippery once you have paste on your fingers, so recapping three of them after a session is messy.
A. Kamath
Identical gold grease, three barrels.
Rajesh B.
Tips have no extra nib covers, only the black screw caps. After opening syringe one I worry dust sits on the nozzle while it lives in the tray with the sealed pair. Grease quality is not the complaint.
S. Sandhu
Client bag carries one syringe for service visits. Same Proevove gold grease, clean to carry, no open tin in the backpack.
A. Mittal
Excellent on trapezoidal screws and the 3-pack is convenient. Small minus: I still have to buy the linear-rod lube seperate, and the listing could shout that louder for people grabbing a lube combo in a hurry.
Kirti Bhatia
Backups mean I actually re-lube
Binding on the POM nut eased after the first full travel. Having backups means I will actually repeat this maintenance instead of postponing. Opened syringe two only when the first ran low after dressing a dirty dual-Z. Same gold PTFE, same warning, no surprise.
Gauri Kamath
Having three identical Proevove lead-screw syringes means I can park one next to each printer. Less chance someone grabs the linear-rod bottle by mistake. Z noise on the Creality dual-Z is down after a clean. Same thick gold PTFE as the single SKU, just enough volume that I am not guarding the last millilitre. 30ml sounds like a lot until you dress two tall screws, wipe the old crust, and still want a sealed spare. I should have done the 3-pack sooner.
Arnav Deshmukh
Happy I bought three. Application on the A1 Z screw went fine once the grease warmed up. All three plungers are stiff from the thick formula, so first-time use on a cold morning is a squeeze, but that is the thick grease doing its job.
Mukesh Kamath
Backups live in the drawer now, but the glossy black caps pick up greasy fingerprints that never wipe clean. I keep a tissue nearby. Paste on the Z screw is the usual thick gold.
Aman Ba.
Anycubic and Bambu both took a thin coat. Extra syringe gifted to the person who keeps borrowing mine.
Jaya R.
Works as advertised on trapezoidal Z screws and I like having spares. Paying for three at once stings on the card even if it is cheaper than repeating singles. That is my only pause.
Sana Kaul
Value pack makes sense if you already know this grease. Not experimenting — just did not want to reorder every two months.
Aarohi Naidu
Used to skip Z lube because the last 10ml ran out. With 30ml on the shelf I cleaned two machines this month instead of waiting. Noise down, less binding, same Proevove grease I already knew. Three syringes also means I can leave one at the second desk so nobody walks off with the only tube. That habit change is the real value of the pack, not a fancy new formula. I am not rationing the last millilitre anymore. Shelf stock is what made me clean both machines in the same week.
Nikhil Desai
Voron builders nearby keep asking what I use on Z. I just point at this Proevove 3-pack. Thick, stays on the screw, does not belong on rails. Tiny minus: no sleeve, so the three barrels clack in the drawer.
Ayush Arora
Kept one in the tool roll for on-site service. Thick grease, no leaking in the bag, black cap held.
Gauri Murthy
Farm maintenance in one evening
Four Z screws across two machines, one evening, one open syringe. Gold grease packed into the threads, brass nuts stopped that dry grab. The unopened pair goes into the consumables bin next to nozzles. Cleaned old film first so the new PTFE had metal to sit on, then jogged each axis until the squeak died. This is why a 3-pack exists if you maintain more than one printer and do not want to reorder mid-job. Will repurchase the pack when the drawer is empty.
Hitesh Mahapatra
Shared one syringe with a friend who has an Anycubic, kept two. Same yellowish-green thick paste, same 'not for linear rods' warning on every label.
Jhanvi Pe.
Extra two tubes sitting in the tool tray.
Kavya Naidu
Proevove 3-pack saved me a second Amazon order when the first syringe ran lower than I expected on a dirty screw. Cleaning eats product if you keep wiping.
Meera Saxena
Opened syringe one, bagged the rest
Syringe one went on the P1S after scraping dry factory film. Parked the other two in a ziplock so dust stays off the tips. Thick enough that it will not leak if the cap is tight.
N. Naik
Running an Ender, a P1S, and a spare Voron frame meant a single 10ml never lasted. This pack is the same gold PTFE grease, three clear syringes, 30ml total. Stocked the drawer and stopped rationing grease between machines. Each barrel has the black screw cap and the same red warning to leave linear rods alone. Opened one, parked two, and finally did Z maintenance on all three frames in the same week instead of waiting for another single-tube reorder. That restock problem is solved for now.
Aarav S.
Packing listed 3 x 10ml and that is exactly what arrived. Clear barrels so I can see remaining volume at a glance.
Vikas More
Clear syringes, gold paste, warning on each. That is the product, and it matches. Tiny minus: I still want a cardboard sleeve so they do not clack.
Bharat Chatterjee
Workshop restock done.
Rakesh Choudhary
Needed linear rod oil as well and assumed a 3-pack might be mixed types. All three are lead-screw grease only. My fault for skimming, but the outer mailer does not spell that in big letters. The grease I can use is fine on Z screws, I just have to place a second order for rods.
Ann Da.
Ab dono printers pe Z smooth hai. Teesra syringe abhi sealed.
Ayesha Pandey
Dual Z plus a spare.
Ravi Dutta
Print farm kit, basically. Lead screws only. I did not touch rails with this.
Anuj S.
Positive on the grease and the quantity. Wish they included three small zip bags so used syringes do not pick up bench dust. Minor thing, not enough to drop a star.
Mary A.
30ml is enough for a small print farm.
Pratik
Elegoo plus an older Prusa clone both got a coat from syringe 1. Plenty left. High-adhesion paste, not a runny oil. Proevove 3-pack is how I stopped sharing one half-empty syringe between benches.
Zain Saha
After cleaning old crust off two Ender lead screws, I used maybe 3ml total. The pack will last a long time for hobby volume.
Sameer Shenoy
Caps stayed shut.