Proevove™ A1 / A1 Mini Hotend Heating Assembly — Ceramic Heater + Thermistor Module
Proevove hotend heating assembly for Bambu Lab A1 and A1 Mini — combines the ceramic heater cartridge and thermistor in a single drop-in module for quick hotend repair.
₹1,349
₹2999.00
10% off · Prepaid
Direct prepaid price — 10% off marketplace, pay on Razorpay.
Add multiple items, then checkout to copy the order block and pay on Razorpay.
Need help choosing? WhatsApp us, call +91 9408584181, or email [email protected].
Key Features
- Replacement ceramic heater + thermistor module for Bambu Lab A1 and A1 Mini hotends.
- Single pre-wired assembly — no soldering required to swap out a failed heater or thermistor.
- Restores accurate temperature readings and stable extrusion after heater-cartridge failure.
- Direct-fit Proevove spare part, designed to match the original A1/A1 Mini wiring and connector.
- Compact 9 × 5 × 3 cm module, 30 g — easy to handle and install.
Specifications
- Brand
- Proevove
- Manufacturer
- Proevove™
- Compatible Printers
- Bambu Lab A1, A1 Mini
- Includes
- Ceramic heater cartridge + thermistor module
- Product Dimensions
- 9 × 5 × 3 cm
- Item Weight
- 30 g
- Country of Origin
- India
About A1 / A1 Mini Heating Assembly
Replacement ceramic heater and thermistor module for Bambu Lab A1 and A1 Mini hotend assemblies. Direct-fit Proevove spare part for restoring reliable temperature control.
Proevove hotend heating assembly for Bambu Lab A1 and A1 Mini — combines the ceramic heater cartridge and thermistor in a single drop-in module for quick hotend repair.
A1 / A1 Mini Heating Assembly is a drop-in hotend or heating part for the printers listed below. Hardened steel lasts longer on carbon fibre, glow, and other abrasive filaments than a brass nozzle.
Match the nozzle diameter to the job: 0.4 mm for everyday PLA and PETG, 0.6 mm or 0.8 mm for faster walls and fibre-filled spools, 0.2 mm for fine detail. Swap the assembly with the printer cool and the filament unloaded.
If this listing is out of stock, keep using a healthy stock hotend and check back. Silicone socks and a clean nozzle wiper still protect the block you have.
How to fit A1 / A1 Mini Heating Assembly: unload filament, let the hotend cool, then swap the assembly following your printer’s manual. Snug the screws; do not over-torque into aluminium. Run a test line before a long print.
What A1 / A1 Mini Heating Assembly is for: Replacement ceramic heater + thermistor module for Bambu Lab A1 and A1 Mini hotends. Single pre-wired assembly — no soldering required to swap out a failed heater or thermistor. Restores accurate temperature readings and stable extrusion after heater-cartridge failure. Direct-fit Proevove spare part, designed to match the original A1/A1 Mini wiring and connector. Compact 9 × 5 × 3 cm module, 30 g — easy to handle and install.
Listed specifications — Brand: Proevove; Manufacturer: Proevove™; Compatible Printers: Bambu Lab A1, A1 Mini; Includes: Ceramic heater cartridge + thermistor module; Product Dimensions: 9 × 5 × 3 cm; Item Weight: 30 g; Country of Origin: India.
A1 / A1 Mini Heating Assembly is listed as compatible with Bambu Lab A1, Bambu Lab A1 Mini.
To buy A1 / A1 Mini Heating Assembly from this website, add it to the cart and pay on Razorpay, or use Buy now where a payment button is shown. Amazon and Flipkart remain available when those links are listed. Prepaid shop orders need a shipping address on Razorpay.
Proevove is based in Bhavnagar, Gujarat. This hotend product is sold prepaid on this shop and on Amazon India, with Flipkart on selected listings.
Made in India
Designed and packed in Bhavnagar, Gujarat for Indian FDM and resin printers.
Amazon Fulfilled
Marketplace orders ship tracked across India through Amazon.
COD on Amazon
Cash on delivery is available on Amazon listings, not on prepaid Razorpay orders.
Easy Returns
Amazon and Flipkart orders follow that marketplace’s return window.
Customer reviews
A1 / A1 Mini Heating Assembly has 17 reviews with an average of 4.5 out of 5.
4.5
Based on 17 reviews
Sahil Mahapatra
Works, wires are skinny
Temperature is accurate again after a heater fault. I am at 3 because the white leads feel too thin when you bend them around the toolhead, and one heat-shrink end looked half-shrunk. Function is fine, finish of the loom is the nit.
I. Baruah
Keyed the right way
Connector keyed the right way. I could not force it in backwards, which is what you want at 1am when the A1 is beeping heater disconnected. White wires, black shrink, click.
Vivaan
Thermal runaway on a long PLA job. New heater-thermistor, same job completed. That is a 5. I did not change filament, slicer, or anything else — only this module.
Urvi Gaikwad
Readings are back and the Mini holds 220 like nothing happened. I still side-eye those skinny white leads near the moving bundle. Maybe I am fussy. Printing has been uneventful for two weeks, which is the actual test.
Nisha Chatterjee
Temps restored. One wire looked a hair shorter so routing was tight on the Mini. Still reached the plug. No more runaway. I am leaving it at 4 for that routing squeeze.
S. Gaikwad
It restored heat after a disconnected-heater error, so the electronics work. Stars off because the white wires feel fragile and the three screws are so small I dropped one under the table. Also no paper install slip — I used a video. Fine spare, fussy packaging of the loom. Temps came back, I just wish the wires felt less skinny while I was routing them. Function is a pass, loom finish is the 3.
Suman
Fixed the Mini. Connector was a bit stiff the first time I seated it. After a wiggle it locked. Temps hold. I would rather stiff than a loose plug that throws disconnected heater again.
Varun Naik
Copper/brass contact on the metal housing looks proper, not a painted dummy. Three black screws were actually in the bag, I counted before I started so I would not hunt later. Housing sat flush on the existing head.
Sanjana Mishra
Ten minutes if you have opened an A1 head once.
Bharat Chavan
Proevove heating assembly saved a weekend. Connector clicked, screws went in, first heat to 220 was clean. I watched the graph for ten minutes like a hawk and it stayed flat. After that I let the A1 finish a PLA clip I had abandoned.
Namrata Prabhu
Mini needed a heater-sensor spare, not another complete head. White leads, black shrink, screws in the bag. Clicked in, first heat to 220 stayed flat.
Sandeep Ghosh
Direct-fit spare. Existing hotend stayed, only the heater-thermistor brick changed. That was the point of buying a module instead of a whole head. Proevove labelled it as a heating assembly and that is exactly what arrived — no extra nozzle in the bag.
Ramesh
Pre-wired module. No iron.
Harsh Mahapatra
Works. Loom is the only place it feels cheaper than OEM. After install I forgot it was a spare and the Mini just printed.
Leena Jadhav
Compact 9x5x3, 30 grams. Arrived as a small brick, installed as a small brick. No surprises in the bag except those three tiny screws.
Trisha
Tiny packet, big relief.
Kiran Chauhan
Proevove module clicked into the same socket. I did not trim, tin, or tape anything. Pre-wired is not marketing on this one.